AU-002 

Network Speaker Driver

Key Features

  • Support SIP and UDP Broadcast Protocol
  • Build in 20W Power Amplifier to Drive Speaker Directly
  • Powered from the IP Network Cable Using PoE+ IEEE 802.3at
  • Remote Configuration and Firmware Upgrade by HTTPS


  • Model
  • AU-002
  • Product Information
    Driver Impedance
  • Lower to 3 ohm speaker totally
  • Average Min. Power
  • 20 W
  • Microphone
  • 100Hz-16KHz Single point, SPL-44 ± 2db AT 2 KΩ
  • LED Luminous
  • 3x LED display status
  • Network
    SIP Support
  • RFC 3261(SIP base standard)
  • Interface
  • WAN: RJ-45x1, 10/100Mbps Fast Ethernet port
  • Supported Protocols
  • SIP, IPv4/v6, RIPv2 / OSPF, HTTPS, QoS DSCP, FTP, TFTP, SNMP v2c / v3, SNMP, IGMP, DHCP, SSHv2, PIM- DVMRP, RMON
  • Audio Codec
  • G.711 a/uLaw, G.726, G.722, G.729, iLBC, L16
  • Support Function
  • Auto provision, Audio tone testing, System log
  • Security
  • Password protection, IP address filter, user access log, authentication
  • VAST 2 Integration (Extension License Required)
    Two-way Communication
  • Supported
  • Automatic Trigger Audio Clips
  • Supported
  • General
    Casing
  • Plastic
  • Power
  • PoE+ (Power over Ethernet), IEEE 802.3at
  • Operating Temperature
  • -35°C ~ 60°C (-31°F ~ 140°F)
  • Dimensions
  • 110 x 85 x 25 mm
  • Weight
  • 115 g (4.3lbs)
  • Certifications
  • CE, FCC, LVD EN62368-1
  • Warranty
  • 24 months
  • PDF
    Datasheet Download
    QIG Download
    Manual Download


    System Architecture

    Latest Tweet

    Contact Us

    • Address: Unit C-09-03, SetiaWalk, Puchong

    • Phone: +603-5879 1211 / 5879 8110

    • Email: info@vivotek.com.my

    Follow Us